Account Bar

Page Top

Thank you for visiting Spectrum Cleaning Solutions. We have detected that you are currently located outside of the United Kingdom.
Unfortunately you won't be able to make any purchases through our online shop but please visit our eBay store where you can buy products which ship internationally.

Main Content Area

Main Articles

1. Fill the tub with water hot water to approximately 4 inches (10cm) above the highest jets.

2. Turn off the air induction valve.

3. Add about 60mls (2 plunges) of Deepclean and 100mls of bleach to the water.

4. Run the jets for around 10—15 minutes.

5. Drain the tub—clean out the residue and refill it with cold water—above the jets again.

6. Run the jets for another 10 minutes—you want to rinse everything out thoroughly.

8. Drain the tub—it should now be ready to re-use.

Health and Safety Information

Please refer to the relevant COSHH safety data sheets.

Wear suitable PPE as per your COSHH assessments.